Give a twist to the decor of the lobby with this unique entryway hall tree made from wooden hangers. Just follow a few simple steps. Trace the outline of the hanger on paper and mark the cut line. Ensures that it is a few inches from center of the hanger. With this pattern, you can transfer the cut line all hangers which thus are at the same height cut each rack for the line you marked. To install the hangers you need a board or piece of wood about 10 cm wide and 2 cm thick to serve as base. Cut it to have a length of about 50 cm. Then, if you want, you can polish the edges.
For an entryway hall tree glossy finish, applies a layer of some form of oil, wax or varnish give brightness. A Touch of color? Unleash your imagination and add color to the wood with paint or colored varnish. Personalize decorating it with your initials or those of your family or writing with the engraver a message more personal. Vintage style. If you like the idea, give a distressed effect. Paint entire entryway hall tree with color to be predominating and let it dry.